View LG-110VIR-CT_4647586.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
LED SMD
Pb
Lead-Free Parts
LG-110VIR-CT
DATA SHEET
DOC. NO : REV. DATE : :
QW0905-LG-110VIR-CT A 21 - Aug - 2006
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LG-110VIR-CT Page 1/10
Features:
1. Package in 8.0mm carrier tape on 7" diameter reel. 2. Low forward voltage 3. Good spectral matehing to Si photo detecor
Descriptions:
1. The LG-110VIR is an infrared emitting diode in miniature SMD package which is molded in a water cleatr plastic with flat top view lens. 2. The device is spectrally matched with silicon photodiode and phototransistor.
Applications:
1. PCB mounted infrared sensor 2. Infrared emitting for miniature light barrier 3. Floppy disk drive 4. Optoelectronic switch 5. Smoke detector
Device Selection Guide:
PART NO LG-110VIR-CT
MATERIAL GaAlAs
Lens Color Water Clear
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LG-110VIR-CT Page 2/10
Package Dimensions
1.5 1.0 0.5
Cathode Mark
0.65
Resin
LED DICE 3.2 0.8
Soldering Terminal
PCB
R1.0
0.65
Note : 1.All dimension are in millimeter tolerance is O 0.1mm unless otherwise noted. 2.Specifications are subject to change without notice.
Recommended Soldering Pad Dimensions
5.0
1.0
0.9 1.0
1.0
1.5
1.5
Note : The tolerances unless mentioned is O 0.1mm,AngleO 0.5. Unit=mm.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LG-110VIR-CT Page 3/10
Absolute Maximum Ratings at Ta=25 J
Parameter
Symbol
Ratings
UNIT
Power Dissipation Peak Forward Current (300pps,10g s Pulse) Forward Current Reverse Voltage Operating Temperature Storage Temperature Soldering Temperature
PD IFP IF Vr Topr Tstg Tsol
100 1 50 5 -25 ~ +85 -40 ~ +85 Max 260J for 5 sec Max
mW A mA V
J J
Typical Electrical & Optical Characteristics (Ta=25 J )
PARAMETER Radiant Intensity Peak Emission Wavelength Spectral Line Half Width Forward Voltage Reverse Current Viewing Angle
SYMBOL Le
Min. 0.85
Typ. 1.4 940 50
Max.
UNIT mW/sr nm nm
TEST CONDITION IF=20mA IF=20mA IF=20mA IF=20mA VR=5V
f peak f
VF IR 2c 1/2
1.2
1.6 100
V
g A
deg
178
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LG-110VIR-CT Page 4/10
Typical Electro-Optical Characteristics Curve
VIR CHIP
1000
Relative Radiant Intensity Normalize @20mA
1.0
Forward Current [mA]
100
10
0.5
1.0 0.1 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
0.0 800 850 900 950 1000 1050 1100
Forward Voltage[V] Fig 3. Relative Radiant Power vs. Forward Peak Current Relative Radiant Power Normalized @ 20mA
10.0
Wavelength[nm] Fig.4 Relative Radiant Power vs. Forward Peak Current
10.0
Relative Radiant Power Normalized @ 100 mA
1.0 10 100
1.0
1.0
0.1
0.1 10 100 1000
IFDC[mA]
IFPK[mA]
Fig.5 Forward DC Voltage vs. Temperature Forw ard DC Voltage @ 20 mA Normalize @ 25J
1.2
Fig.6 Relative Radiant Power vs. Temperature
3.0 2.5 2.0 1.5 1.0 0.5 0 -40 -20 0 20 40 60 80 100
1.1 1.0
0.9 0.8 -40 -20 0 20 40 60 80 100
Relative Radiant Power @ 20mA, Normalize @ 25J
Ambient Temperature [J ]
Ambient Temperature [J ]
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LG-110VIR-CT Page 5/10
Carrier Type Dimensions
4.00.2
2.0
1.5
0.25
1.75 3.50.2 5.3 Polarity 1.25 4.00.2 1.87
8.00.3 3.4
Note : The tolerances unless mentioned is O 0.1mm,Angle O 0.5. Unit=mm.
E Packing Specifications
Label
Aluminum Moist-Proof bag
Label
Part No. LG-110VIR-CT
Description 8.0mm tape,7"reel
Quantity/Reel 3000 devices
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LG-110VIR-CT Page 6/10
Label Explanation
uOqlu*~N/|-1/2
LIGITEK LED
LIGITEK ELECTRONICS CO., LTD.
Pb
BIN : Luminous Intensity 1.1 - 1.3 : Forward Voltage
1.1 - 1.3
PART NO. : LG-110VIR-CT LOT NO. : GSI-680024 Q'TY(PCS) : 3000 PCS BIN/HUE : K
Reel Dimensions
2.0O 0.5
0.8
0.6
0.4
0.2
178O 1.5
6.0O 1.0
0.4
r 13.5O 1.0
0.2
0.6
0.8
9.0O 1.0 12.0O 1.0
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LG-110VIR-CT Page 7/10
Box Explanation
1. 5 BAG / INNER BOX 2. INNER BOX SIZE : L X W X H 23cm X 8.5cm x 26cm
H W
L
3. 10 INNER BOXES / CARTON 4. CARTON SIZE : L X W X H 49cm X 46cm x 29cm
L
W
H
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LG-110VIR-CT Recommended Soldering Conditions 1. Hand Solder
Basic spec is O 280J 3 sec one time only.
Page 8/10
2. Wave Solder
Soldering heat Max. 260J 245O 5J within 5 sec Preheat
120 ~ 150J
120 ~ 180 sec
3-1. LEAD Reflow Solder
Temp. (J ) 240
Rising +5J /sec Cooling -5J /sec
150 120
Preheat
60 ~ 120 sec
5sec
Time
3-2 PB-Free Reflow Solder
1~5 C/sec 260 C MaX. 10sec.Max
Preheat 180~200 C 1~5 C/sec
Above 220 C 60 sec.Max.
120 sec.Max.
Reflow Soldering should not be done more than two times.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LG-110VIR-CT Precautions For Use: Storage time:
1.The operation of Temperatures and RH are : 5J ~35J ,RH60%. 2.Once the package is opened, the products should be used within a week. Otherwise, they should be kept in a damp proof box with descanting agent. Considering the tape life, we suggest our customers to use our products within a year(from production date). 3.If opened more than one week in an atmosphere 5 J ~ 35J ,RH60%, they should be treated at 60JO 5 J fo r 15hrs.
Page 9/10
Drive Method:
LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series with the LED. Consider worst case voltage variations than could occur across the current limiting resistor. The forward current should not be allowed to change by more than 40 % of its desired value.
Circuit model A LED
Circuit model B LED
(A) Recommended circuit. (B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED.
Cleaning:
Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED.
ESD(Electrostatic Discharge):
Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic glove is recommended when handing these LED. All devices, equipment and machinery must be properly grounded.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LG-110VIR-CT Reliability Test: Page 10/10
Classification
Test Item
Test Condition
1.Ta=Under Room Temperature As Per Data Sheet Maximum Rating. 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs)
Reference Standard
MIL-STD-750D: 1026 MIL-STD-883D: 1005 JIS C 7021: B-1
Operating Life Test
High Temperature Storage Test Endurance Test Low Temperature Storage Test
1.Ta=105 JO 5J 2.t=1000 hrs (-24hrs, +72hrs)
MIL-STD-883D:1008 JIS C 7021: B-10
1.Ta=-40 JO 5J 2.t=1000 hrs (-24hrs, +72hrs)
JIS C 7021: B-12
High Temperature High Humidity Storage Test
1.Ta=65JO 5J 2.RH=90 %~95 % 3.t=1000hrs O 2hrs
MIL-STD-202F:103B JIS C 7021: B-11
Thermal Shock Test
1.Ta=105 JO 5J &-40JO 5J (10min) (10min) 2.total 10 cycles
MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1011 MIL-STD-202F: 208D MIL-STD-750D: 2026 MIL-STD-883D: 2003 IEC 68 Part 2-20 JIS C 7021: A-2 MIL-STD-202F: 107D MIL-STD-750D: 1051 MIL-STD-883D: 1010 JIS C 7021: A-4
Solderability Test
1.T.Sol=235 JO 5J 2.Immersion time 2 O 0.5sec 3.Coverage U 95% of the dipped surface
Environmental Test
Temperature Cycling
1.105J ~ 25 J ~ - 55J ~ 25J 30mins 5mins 30mins 5mins 2.10 Cyeles
IR Reflow
1.T=260 C Max. 10sec.Max. 2. 6 Min
MIL-STD-750D:2031.2 J-STD-020

▲Up To Search▲

Price & Availability of LG-110VIR-CT

	To Download LG-110VIR-CT Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .